MB Gigabyte EP45T-EXTREME

MB Gigabyte EP45T-EXTREME

 1. Support for an Intel® Core™ 2 Extreme processor/ Intel® Core™ 2 Quad processor/Intel® Core™ 2 Duo processor/ Intel® Pentium® Dual-Core processor/Intel® Celeron® processor in the LGA 775 package
    (Note) This motherboard is designed with VRD11.1 power phase, and cannot be compatible with VRD10 designed CPU. Please refer to "CPU Support List" for details.
 2. L2 cache varies with CPU

Front Side Bus

 1. 1600/1333/1066/800 MHz FSB

Chipset

 1. North Bridge: Intel® P45 Express Chipset
 2. South Bridge: Intel® ICH10R

Memory

 1. 4 x 1.5V DDR3 DIMM sockets supporting up to 8 GB of system memory
 2. Dual channel memory architecture
 3. Support for DDR3 2000/1600/1333/1066/800 MHz memory modules
    (Refer to Memory support list for more information)

Audio

 1. Realtek ALC889A codec
 2. High Definition Audio
 3. 2/4/5.1/7.1-channel
 4. Support for Dolby Home Theater
 5. Support for S/PDIF In/Out
 6. Support for CD In

LAN

 1. 2 x Realtek 8111C chips (10/100/1000 Mbit)
 2. Support for Teaming

Expansion Slots

 1. 1 x PCI Express x16 slot, running at x16
 2. 1 x PCI Express x16 slot, running at x8
    (The PCIEx16 and PCIEx8 slots support ATI CrossFireX technology and conform to PCI Express 2.0 standard.)
 3. 1 x PCI Express x4 slots
 4. 1 x PCI Express x1 slot
 5. 3 x PCI slots

Storage Interface South Bridge:

 1. 6 x SATA 3Gb/s connectors (SATAII0, SATAII1, SATAII2, SATAII3, SATAII4, SATAII5) supporting up to 6 SATA 3Gb/s devices
 2. Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10

iTE IT8213 chip:

 1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices

iTE IT8720 chip:

 1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive

IEEE 1394a

 1. T.I. TSB43AB23 chip
 2. Up to 3 IEEE 1394a ports (via the IEEE 1394a brackets connected to the internal IEEE 1394a headers)

USB

 1. Integrated in the South Bridge
 2. Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers)

Internal I/O Connectors

 1. 1 x 24-pin ATX main power connector
 2. 1 x 8-pin ATX 12V power connector
 3. 1 x floppy disk drive connector
 4. 1 x IDE connector
 5. 6 x SATA 3Gb/s connectors
 6. 1 x CPU fan header
 7. 2 x system fan headers
 8. 1 x power fan header
 9. 1 x front panel header
10. 1 x front panel audio header
11. 1 x CD In connector
12. 1 x S/PDIF In header
13. 1 x S/PDIF Out header
14. 2 x USB 2.0/1.1 headers
15. 3 x IEEE 1394a headers
16. 1 x serial port header
17. 1 x chassis intrusion header
18. 1 x power LED header
19. 1 x power switch
20. 1 x reset switch

Back Panel Connectors

 1. 1 x PS/2 keyboard port
 2. 1 x PS/2 mouse port
 3. 1 x optical S/PDIF Out connector
 4. 1 x coaxial S/PDIF Out connector
 5. 1 x clearing CMOS switch
 6. 8 x USB 2.0/1.1 ports
 7. 2 x RJ-45 ports
 8. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)

I/O Controller

 1. iTE IT8720 chip

H/W Monitoring

 1. System voltage detection
 2. CPU/System temperature detection
 3. CPU/System/Power fan speed detection
 4. CPU overheating warning
 5. CPU/System/Power fan fail warning
 6. CPU/System fan speed control

BIOS

 1. 2 x 8 Mbit flash
 2. Use of licensed AWARD BIOS
 3. Support for DualBIOS™
 4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b

Unique Features

 1. Support for @BIOS
 2. Support for Q-Flash
 3. Support for Virtual Dual BIOS
 4. Support for Download Center
 5. Support for Xpress Install
 6. Support for Xpress Recovery2
 7. Support for EasyTune
 8. Support for Dynamic Energy Saver Advanced
 9. Support for Time Repair
10. Support for Q-Share

Bundle Software

 1. Norton Internet Security (OEM version)

Operating System

 1. Support for Microsoft/ Windows/ Vista/XP

Form Factor

 1. ATX Form Factor; 30.5cm x 24.4cm

Note

 1. To enable Teaming or Bonding (IEEE 802.3ad Link Aggregation) feature, it is required the connected network switch or router device supports 802.3.ad LACP function.
    Please refer to your network switch or router device manual for further details.

Remark

 1. Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
 2. Due to most hardware/software vendors no longer offer support for Win9X/ME. If some vendors still has Win9X/ME drivers available, we will publish on website.